In my earlier post I went through the procedure of how to physically connect a single LED component into an AC network. The connection was made between COB LED and the LED driver. When connecting LED modules (LED diodes assembled on the PCB board) you do it pretty much the same way with slight differences.…
I have two blog posts for you focused on how you connect COB LED components into the electrical network. I mean, when you have either a single COB LED or an LED module based on SMD LED components assembled on a PCB board. Compared to traditional lighting, connecting LEDs to the electrical network is a whole…
Datasheets are essential part when you compare how different light sources work in your solution. Usually it can be time taking and exhausting to glance at datasheet and find values you are looking for. This gets even harder if you have multiple LEDs or different LED packages, which would mean that you have look at…
There are tons of different LEDs even in one manufacturer’s selection so how on earth can you find the right LED for your solution? In my previous post I discussed about the basic characteristics and operation principles of LEDs. In this post I will discuss about different packages and about the facts that will…